Wakeboard Towers - How To Fit Your Own

Wakeboard Towers A tower greatly enhances your wakeboard experience. When being pulled by a boat with a tower the height of the rope will make it easier to pop on the wake and acheive much higher & longer wake jumps. Unless you can afford a high-end speedboat desinged for wakeboarding such as the Mastercraft range you either have to search a specialist to fit a tower to your boat or fit your own. Monster tower have long been a favourite of Wakeboarders - we bought one and here is a rough guide on how to fit it:
Why need a wakeboard tower?
Wakeboarding UK decided it was time to buy a new MonsterTower and fit it to a 20ft Wellcraft. To give you an idea of how easy it is to fit your own wakeboard tower we took a few pics:
1) One untouched Wellcraft speedboat:	2) We hoisted the tower by rope above the boat first of all in order to get a good idea of where we wanted it to sit. Once in a good position hold it steady and mark off where you need to drill for the four anchor points. Wherever you drill you will need get in behind the boat exterior to fit a fixing plate for the anchor point....

3) The point of no return!! Drill away!! This is one of the anchor points (by the windscreen wiper) below for the Monster Tower.	4) Next its a matter of gently lowering the tower down onto the fixing points, screw everthing up tight and there you go - as easy as that.

	After fitting the tower: Shes looking sweet & ready! All you need now are some wakeboard tower speakers